| 
|
|
SUPER
HIGH PRESSURE PUMPS
» 03 or 04 roller bearings on Crankshaft.
» Forced lubrication on con-rod shell, bolt and crossheads as
standard accessories.
» Filter, heat exchanger, gauge, by-pass valve and pressure sensor
for oil.
Fluid End:
» Fluid-End, valves and valve seats in stainless steel, fatigue
resistant (all valves may be reconditioned by surface grinding.
» Cylinders in Stainless Steel
» Lamellar seal for S.H.P. Pumps(1.400 BAR).
» Plungers in Tungsten Carbide, connected with elastic balancing
coupling, and water refrigerated.
» Admit to change the cylinder assemblage to modify the pressure
and the flow rate.
» Pneumatic Pressure Regulator as standard accessory for S.H.P.
Pump
» Easy Maintaince
» Exit block with connection in S. S. and manometer with glycerin
» Rupture disk (Max. pressure +20%) |
| |
Optional
» Equipment protection, such as suction pressure switch, water and
oil thermostats. |
| L-120/3 SHP Pump GIII - up to 120 HP (90KW) |
| |
| 80-mm crankshaft course
500 rpm
|
Power in hp (kw) / 1.800 rpm
Continuos operation |
| Piston diameter |
Liter per minute |
70 hp (51 kw) |
80 hp (59 kw) |
100 hp (75 kw) |
120 hp (90 kw) |
| Pressure in bar |
| Ø20 |
38 |
740 |
830 |
1.100 |
1.400 |
| Ø22 |
46 |
610 |
690 |
900 |
1.000 |
| Ø26 |
60 |
430 |
500 |
660 |
800 |
| Ø28
|
69 |
400 |
460 |
590 |
700 |
| Ø30 |
80 |
330 |
370 |
510 |
600 |
| Ø35 |
109 |
240 |
275 |
365 |
430 |
|
| |
| L-180/4 SHP Pump GIII - up to 180 HP (132KW) |
| |
| 100-mm course
450-rpm crankshaft
|
Power in hp (kw) / 1.800 rpm
Continuos operation |
| Piston diameter |
Liters per rotation |
Liters/min |
100 hp (75 kw) |
120 hp (90 kw) |
150 hp (112 kw) |
180 hp (134 kw) |
| Pressure in bar |
| Ø20 |
0,090 |
43 |
920 |
1,080 |
1.400 |
------ |
| Ø22 |
0,109 |
51 |
760 |
890 |
1.130 |
1.470 |
| Ø24 |
0,130 |
61 |
640 |
750 |
940 |
1.170 |
| Ø26 |
0,153 |
72 |
545 |
640 |
800 |
1.000 |
| Ø28 |
0,184 |
83 |
460 |
520 |
690 |
860 |
| Ø30 |
0,203 |
95 |
410 |
480 |
600 |
750 |
| Ø35 |
0,277 |
128 |
295 |
355 |
440 |
540 |
| Ø45 |
0,456 |
213 |
165 |
200 |
270 |
------ |
|
| |
| L-300/4 SHP Pump GIII - up to 300 HP (225KW) |
| |
| 100-mm course
480-rpm crankshaft
|
Power in HP(KW) / 1.800 rpm
Continuos operation |
|
Piston diameter |
Liters
per rotation |
Liters/min |
200 HP(150 KW) |
225 HP(168 KW) |
250 HP(187 KW) |
300 HP(225 KW) |
| Pressure in Bar |
| Ø26 |
0,150 |
76 |
1,065 |
1.193 |
1.290 |
------ |
| Ø28 |
0,174 |
88 |
920 |
1.030 |
1.150 |
1.470 |
| Ø30 |
0,200 |
101 |
800 |
900 |
972 |
1.280 |
| Ø32 |
0,230 |
115 |
704 |
790 |
855 |
1.030 |
| Ø35 |
0,280 |
138 |
586 |
657 |
730 |
860 |
| Ø38 |
0,330 |
163 |
496 |
560 |
620 |
730 |
| Ø40 |
0,370 |
180 |
450 |
500 |
560 |
675 |
|
|
